Skip to content

Changelog

29/05/2024

  • Updated script to 6.2.0:
    • Added Screws Tilt Adjust Support for KE Series (thanks to foresterr).
    • Minnor fixes.

19/05/2024

  • Updated script to 6.1.0:
    • Added a new factory reset method, user preferences and connection settings are now preserved and it's possible to reset to factory settings with USB drive (thanks to pellcorp).
    • Added M600 support for KE Series (thanks to ceedee666).
    • Minnor fixes.
  • Added links for firmware V1.3.3.29 for K1 Series.
  • Added links for firmware V1.2.1.13 for KE Series.
  • Updated Wiki accordingly.

01/05/2024

  • Updated script to 6.0.0:
    • Added support for Ender-3 V3.
    • Added Nebula Camera Settings Control support for Ender-3 V3 and KE Series.
    • Added USB Camera Support to use third-party camera (thanks to destinal).
    • Now possible to install Camera Settings Control on K1 Series with the new hardware version of the camera if you have installed USB Camera Support.
    • Added possibility to install Nightly or Release builds with Guppy Screen.
    • Added possibility to reload Creality cameras with RELOAD_CAMERA macro when installing Useful Macros to restore a disconnected camera without needing to restart the printer (thanks to jattie-ire).
    • Reworked Git Backup install process.
    • Improved Klipper Adaptive Meshing & Purging with new prompt macros. You can now define the type of bed mesh and the type of purge line to use.
    • Removed Virtual Pins from Install/Remove menus, it now installed with Klipper Adaptive Meshing & Purging.
    • Updated M600 Support macros with new prompt macros.
    • Updated Fans Control Macros feature.
    • Change in Buzzer Support macro to have one beep per command.
    • Fixed WARMUP macro error with Useful Macros feature.
    • Minnor fixes.
  • Updated Wiki accordingly.

13/04/2024

  • Updated GuppyFLO install process to save and restore existing configuration when updating.

11/04/2024

  • Added possibility to define branch name when installing Git Backup (thanks to 3DPrintingGeek).

08/04/2024

06/04/2024

01/04/2024

31/03/2024

  • Updated script to 5.3.0 to add support for SimplyPrint. See new section on wiki here.

30/03/2024

  • Updated script to 5.2.0 to add support for OctoApp Companion (Thanks to crysxd). See new section on wiki here.

27/03/2024

  • Updated GuppyFLO section to add configuration for camera.

23/03/2024

  • Updated script to 5.1.0 to add support for GuppyFLO. See new section on wiki here.

21/03/2024

  • Updated Wiki with new 1.3.3.8 Creality firmware.

11/03/2024

  • Updated script to 5.0.1 to fix Mainsail on port 80 when removing Creality Web Interface.

10/03/2024

Warning

Due to many changes in files, it's necessary to reset factory settings before using script!

  • New Wiki.
  • New script version 5.0.0:
    • Ended support for old firmwares (only support 1.3.3.5 and above for K1 Series and 1.1.0.12 and above for KE Series).
    • Added support for Creality KE printers (for compatible features).
    • Code completely rewritten.
    • Now installed in /usr/data/helper-script and it completely offline (except for downloading official builds).
    • Updates can be done when the script is started or from the Update Manager on Web interfaces.
    • All files are symbolic links, allowing you to always have the latest versions if they are updated after a script update.
    • Supervisor Lite and Host Control Support are now installed with Moonraker.
    • Fixed loops in WARMUP macro when installing Useful Macros.
    • Added support for Klipper Virtual Pins. This allows usage of virtual (simulated) pins in Klipper configurations.
    • Added support for Git Backup. This allows to watch Klipper configuration folder and automatically backup to GitHub whenever a change is made in that directory.
    • Added support for new Mobileraker Companion installation and can be updated from Update Manager.
    • Added M600 Support. This allows to use M600 command in your slicer to change filament.
    • Added possibility to Backup & Restore Moonraker database in [Backup & Restore] Menu.
    • Added Fix Printing Gcode files from Folder in [Tools] Menu.
    • Added possibility to update Entware packages in [Tools] Menu.
    • Added possibility to enable Camera settings in Moonraker in [Tools] Menu.
    • Added possibility to backup and restore Klipper configuration files and Moonraker database with macros when installing Useful Macros.
    • Added possibility to Reset Factory Settings directly from the script in [Tools] Menu. Reset from WebSocket connection with html file is not needed anymore.
  • KAMP is now integrated in Helper Script (repo has been removed) with this changes:
    • Removed not used settings.
    • Removed blob purge and replaced by classic line purge when KAMP purge is not possible.
    • Improved START_PRINT macro, you can now disable KAMP with KAMP button on Web interfaces.
      When KAMP is enabled: A bed mesh named "kamp" is created and loaded to use adaptative bed mesh.
      When KAMP is disabled: A bed mesh named "default" is created and loaded to use classic calibration (full bed mesh), you can also disable bed leveling before print with BED_LEVELING button on Web interfaces (it have no effect when KAMP is enabled).