Skip to content

Fans Control Macros

This allows to trigger the back fan depending on the chamber temperature and the motherboard fan depending on the CPU temperature.

Note

This procedure must be repeated after restoring the printer to factory settings.

Installation

  • Make sure you have followed this Install Helper Script section before.

  • In the script, enter in [Install] Menu by typing 1 , validate with Enter and install Fans Control Macros:

  • You can now change the trigger temperature of the chamber and motherboard fans here:

  • You can also change the motherboard fan speed manually here:

  • You can also use Print chamber temperature function in OrcaSlicer with M141 Sxx and M191 Sxx commands:

  • You can also use Exhaust fan function in OrcaSlicer with M106 P3 Sxx command:


If you like my work, don't hesitate to support me by paying me a 🍺 or a ☕. Thank you 🙂