Skip to content

Updated Moonraker

This allows to install official and latest build of Moonraker.

Moonraker is a Python 3 based web server that exposes APIs with which client applications may use to interact with Klipper firmware.

Note

This procedure must be repeated after restoring the printer to factory settings.

Installation

  • Make sure you have followed this Install Helper Script section before.

  • In the script, enter in [Install] Menu by typing 1 , validate with Enter and install Updated Moonraker:

    Note

    You can update Moonraker with Update Manager in Fluidd or Mainsail Web interface when a new version is available.

Supervisor Lite

When installing Updated Moonraker, Supervisor Lite is also installed.

It allows to manage services with Moonraker.

  • You can restart and stop service with Moonraker in Update Manager or on Web interfaces:

    Fluidd Mainsail

  • It can be also used in SSH with this command:

    /usr/bin/supervisorctl [command] <service>

    Commands include: status stop start restart

Host Control Support

When installing Updated Moonraker, Host Control Support is also installed. This allows to use Reboot and Shutdown buttons on Fluidd or Mainsail. By default they are not working.

  • You can restart and stop host on Web interfaces:

    Fluidd Mainsail


If you like my work, don't hesitate to support me by paying me a 🍺 or a ☕. Thank you 🙂