Skip to content

Remove & Restore Creality Web Interface

This allows to remove Creality Web interface and replace it with Fluidd or Mainsail Web interface on port 80.

Note

This procedure must be repeated after restoring the printer to factory settings.

Remove Creality Web interface

  • Make sure you have followed this Install Helper Script section before.

  • In the script, enter in [Customize] Menu by typing 3 , validate with Enter and select Remove Creality Web Interface:

  • The script detects whether Fluidd or Mainsail is installed and will override Creality's default interface.
    If both Fluidd and Mainsail are installed, the script will ask you which Web interface you want to replace Creality's default interface.

  • You will then be able to connect to:

    • Fluidd using the following URL: http://xxx.xxx.xxx.xxx by replacing xxx.xxx.xxx.xxx by your local IP address (http://xxx.xxx.xxx.xxx:4408/ also remaining accessible) if you chose Fluidd as your default Web interface

    or

    • Mainsail using the following URL: http://xxx.xxx.xxx.xxx by replacing xxx.xxx.xxx.xxx by your local IP address (http://xxx.xxx.xxx.xxx:4409/ also remaining accessible) if you chose Mainsail as your default Web interface

Restore Creality Web interface

  • Make sure you have followed this Install Helper Script section before.

  • In the script, enter in [Customize] Menu by typing 3 , validate with Enter and select Restore Creality Web Interface:

  • You will recover the classic use:

    • Creality Web interface accessible with the following URL: http://xxx.xxx.xxx.xxx by replacing xxx.xxx.xxx.xxx by your local IP address

    • Fluidd Web interface accessible with the following URL: http://xxx.xxx.xxx.xxx:4408 by replacing xxx.xxx.xxx.xxx by your local IP address

    • Mainsail Web interface accessible with the following URL: http://xxx.xxx.xxx.xxx:4409 by replacing xxx.xxx.xxx.xxx by your local IP address


If you like my work, don't hesitate to support me by paying me a 🍺 or a ☕. Thank you 🙂